![]() ![]() Alkaline batteries are best used in “low-drain” devices, which includes clock movements. Lithium and rechargeable batteries are meant for “high-drain” devices, such as digital cameras, etc. Lithium powered or re-chargeable batteries will cause your clock to malfunction, or not function at all. Alkaline batteries are the only type of battery that should be used in clocks. All of our quartz movements are shipped with mounting hardware. Threaded part of hand shaft is 3/16' (7mm) long, 5/16' diameter, to go through up to 1/8' thick clock face. Other brands, such as Energizer, have extra plastic coating on the negative end of the battery, which can cause clocks to malfunction or not work properly at all. Youngtown puts 12888 on all of there movements. We recommend using Rayovac or Duracell brand. **When choosing the proper batteries for your clock, please consider the following information: There are many brands of alkaline batteries available on the market today, but there are several brands out there that just don’t perform well in clocks. Second hands are also sold separately and can be purchased HERE.The price will be adjusted as you choose the style(s) you want from the drop down menu. Hour and Minute hands are sold separately as a pair above (please see pictures).Will not run hands larger than 6″ (measurement is from the center of the mounting hole to the end of the minute hand only). 1-48 of 270 results for 'mini clock movement' Results Price and other details may vary based on product size and color.Long – 3/8″ threaded length, 11/16″ overall Only comes in 1 shaft length at this time: Med.PLEASE MAKE YOUR MENU & QUANTITY SELECTIONS FIRST TO SEE THE CORRECT PRICING APPEAR IN THE TABLE BELOW.** Hands ![]() **QUANTITY DISCOUNTS ARE AVAILABLE FOR THIS ITEM. Due to the nature of Radio Signals this movement CANNOT be used with Metal Dials or Cases. We recommend reading the simple, easy to understand manual before starting the movement. Just attach the hands, remove the locking device and enter your time zone. The movement is preset to 12:00 making it easy to start. The clock movement automatically adjusts for Daylight Savings Time. Taking into account your time zone the radio signal self-corrects the time daily. A miniaturized radio receiver inside the movement monitors a low frequency time signal from The National Institute of Standards and Time in Fort Collins, Colorado - the same source used by radio and TV stations, power companies, air traffic control systems, etc. Automatically sets itself to the correct time at Daylight savings time.Īccurate to Less Than One Second in One Million Years! Atomic Clock Accuracy. This Atomic movement is accurate to +/- 1 second per day, synchronizing up to 7x a day. Alkaline batteries are best used in “low-drain” devices, which includes clock movements.Equipped with “Signal Strength System” – A special antenna designed for increased reception sensitivity. Other brands, such as Energizer, have extra plastic coating on the negative end of the battery, which can cause clocks to malfunction or not work properly at all. Regular size Hour and Minute hands (1″-6″ long) are sold separately as a pair above (please see pictures).Choose from 2 Shaft Lengths: Small 3/16 Collar Sleeve Depth Medium 1/4 Collar Sleeve Depth. Includes Mounting hardware and basic instructions. The most powerful German high torque clock movement on the market today Powers up to 17.5 hands Specifications: Case size: 2-1/4W x 2H x 5/8D.If you want to purchase larger hands ( remember this movement can only run up to 10″ hands) they are sold separately on our site and can be found here: Extra Large Hands ![]() We measure the minute hand only from the center of the mounting hole to the end (we don’t measure any tail). If your hands are longer than this you will need one of our stronger High Torque movements.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |